NEW

Gsk988t CNC Controller System

Brief Intro

GSK988T CNC controller system from CNCmakers Limited. GSK988T CNC Turning center/lathe controller: Five feeding axes(including C axis), any three axes linkage, two analog spindles, support combined processing of turning and milling, 8.4 inch true color

Description

GSK988T CNC controller system from CNCmakers Limited. GSK988T CNC Turning center/lathe controller: Five feeding axes(including C axis), any three axes linkage, two analog spindles, support combined processing of turning and milling, 8.4 inch true color LCD supports two-dimensional traverse path, display in stereogram PLC ladder program, DNC communications equipped with internet interface, and it supports remote monitor and file transmission and satisfies the requirements of internet education and workshop management. GSK988T is the best choice for slant bed CNC lathe and turning center. Characteristics: 1-Five feeding axes(including C axis), any three axes linkage, two analog spindles, support combined processing of turning and milling. 2-Command unit: 1um or 0.1 um is selected, maximum speed is 60m/min, when it is 0.1 um, and the maximum speed is 24m/min. 3-Adapted with servo unit of GSKLink, and realize servo parameter reading and writing and servo unit real-time monitor. 4-Through serial bus, it can extend I/O unit and GSKLink axis. 5-Built-in many PLC programs, PLC ladder diagram is edited on-line, real-time monitor. 6-Background edit part program. 7-Equipped with internet interface, support remote monitor and file transmission. 8-With USB interface, it supports file operation, system configuration and software upgrade in flash disk. 9-With 8.4 inch true color LCD, it support two-dimensional traverse path, display in stereogram Technical Specification Control axes 1-Maximum axes: five axes (including C axis) 2-Maximum linkage axes: three axes 3-Number of PLC control axes: five axes 4-Number of GSKLink axes: two axes Feeding axis function 1-Minimum command unit: 0.001mm or 0.0001mm is selected. 2-Position command range: ±99999999 x minimum command unit. 3-Rapid traverse unit: When the command unit is 0.001mm, the maximum speed is 60m/min. When the precision is 0.0001mm, the maximum speed is 24m/min.

Birthday